 |
  |
產品詳情
一、除塵器主要部件的功能：
首先：振動電機、它是一種常偏心振子的三相電機當電機運行時偏心振子產生離心力，振動機整體振動；其振動力大小可調整偏心振子。
其次，濾芯是本除塵器的*基本件，是除塵器精度和壽命的關鍵，其主要在于濾布的質量及使用方法。
*后，振動盤是和振動電機一起完成清理工作的主要組成，它所產生的效果直接影響濾芯的清理成度。
First: the vibration motor, it is the three-phase motor when the motor is running a regular eccentric vibrator eccentricvibrator produces centrifugal force, the overall vibration of the vibrating machine; the size of the vibration forceadjustable eccentric vibrator.
Second, the filter is a basic member of the precipitator and precipitator precision and the life of the key, which mainly lies in the quality and method of use of the filter cloth.
Finally, the vibrating plate and the vibrating motor with the completion of a major component of the cleanup work, the effectit produces directly affect the filter into the clean-up.
二、除塵器使用方法：
1、每次動轉水泥倉上料時進氣壓力不準超過0.1-0.15（MPa）否則壓力過高會將濾芯折彎，水泥倉一定要安裝料位計，防止灰滿時將濾芯折彎。水泥倉上料完畢后，啟動振動電機除塵。電機振動5-6分鐘關閉，時間允許*好振動除塵30分鐘關閉。
2、每兩到三個月時間，將濾芯取下，使用干燥壓力空氣將濾芯反吹，清理，提高濾芯的過濾能力。
3、一般在除塵器出廠前都做了彈簧的振動調整，每次拆裝時一定要保證予緊力。
Inlet pressure must not exceed 1, cement silo feeding each dynamic change 0.1-0.15 (MPa) or the pressure is too high will filter bending, cement silo level meter must be installed to prevent gray full filterbending. The cement silo material after start vibrating motor dust. The motor vibration 5-6 minutes offtime to allow the best vibration dust 30 minutes off.
2, every two to three months time, the filter is removed using a dry pressure air will filter blowback, clean up and improve the filtering capacity of the filter.
, Usually before the precipitator factory do spring vibrations adjustments, we must ensure that eachdisassembly to the clamping force.
企業名片
推薦供應
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責?？諌簷C產業網對此不承擔任何責任。
友情提示：為規避購買風險，建議您在購買相關產品前務必確認供應商資質及產品質量。
